NiosII IDE 9.0 bug-Cyclone III Nios can't not boot up from EPCS device

NiosII IDE 9.0 bug-Cyclone III Nios can't not boot up from EPCS device


想把NiosII的用户程序下载到CycloneIII上，折腾了好久没下进去，最后发现这是Altera的bug，火大了
发给大家看看，希望没人在此耽误功夫

Problem  

Why does my Cyclone III Nios II system not boot up from an EPCS device when I program the EPCS with Flash Programmer ver.9.0?
Solution  

Nios® II embedded processor executable code is not correctly programmed on an EPCS device with version 9.0 and 9.0sp1 Nios II Flash Programmer tool chain.

Version 9.0 and 9.0sp1 contain a bug in the tool chain. To solve this problem, contact Altera® technical support via mySupport to request the Nios II EDS 1.01 patch.

This problem will be fixed by Nios II EDS version 9.0sp2 .

Altera网站上的support：
http://www.altera.com/support/kdb/solutions/rd06022009_270.html

折腾了好久没下进去，最后发现这是Altera的bug